Digital Coating Thickness Gauge
Coat Gauge FN xL
Coat Gauge FN xL has an integrated probe with V-groove for measuring thickness of non-magnetic coatings on ferrous substrates and non-conductive coatings on non ferrous substrates. It can be used to measure thickness of paint, anodizing layer, galvanizing layer, lacquer layer, porcelain enamel, phosphide layer, copper tile, etc.
- Integrated V-groove probe for proper alignment during measurement.
- Large display for better readability.
- Two measure modes: single and continuous.
- Select um/mil measuring units.
Model : Metrix+ Coat Gauge FN xL
Measuring principle : Magnetic induction(F) & Eddy Current(NF)
Measuring range : 0 to 1500um (0 to 59mils)
Accuracy : +(2.5%+2um) ; +(2.5%+0.08mil)
Resolution : 0.1um/0.01mil
Calibration : Zero Calibration, Multi-Points Calibration
Units : um, mils
Minimum curvature radius : 1.5mm(convex) ; 25mm(concave)
Minimum measuring area : Diameter 6mm
Minimum thickness of substrate : 0.5mm(0.02")(F) ; 0.3mm(0.012")(NF)
Power supply : 4 x 1.5V AAA battery
Operation environment Temperature : 0 to 40C(32 to 104F) ; Humidity : 20% to 90%rh
Size : 155mm x 62mm x 35mm(6.10" x 2.44" x 1.38")
Weight : 125g(4.14 oz)
Standard Accessories : Coating Thickness Gauge, '0' calibration block, standard foils,
batteries, Technical manual.
206, Anand Jyoti, 41, N.S. Road, Kolkata, Kolkata, West Bengal, 700001, India